37% Lighter Trolley Cart for FleetPride — Validated in Ansys
FleetPride's axle trolley cart redesigned in Ansys — 37% lighter (210 lbs → 132 lbs) while maintaining full 1,000 lb rated capacity.
Even today, a lot of companies are receiving analog film when they perform non-destructive tests (NDT) on large equipment, tanks, and machinery. These tests are typically X-rays performed on the existing equipment, and the only way to print an X-ray is on analog film (just like an X-ray of a broken bone).
However, analog film is incredibly difficult to use and share with other people. This means that you’ll get the results of your NDT, but then you’ll have no way of using the results.
This is where our professional outsourced NDT film digitization services come on. We’ll turn every physical piece of film into a high-quality image you can open on your computer, laptop, or phone.

NDT film digitization services will take your physical analog film and put it through a professional scanning machine, converting the file into a digital copy that you can open on your computer. The process works just like photocopying an old Mylar engineering drawing, but with some additional huge complications.
For one, X-ray film is really sensitive to the wrong kind of light. Flashing a bright light on the film too many times could make the X-ray unreadable. Instead, we have to use specifically-designed machines that scan each piece of film with the required sensitivity.
When you choose CAD/CAM Services for our NDT film digitization services, you’ll exchange your analog film for fully-optimized virtual copies of each image.

As we mentioned, analog film is really difficult to work with and handle. An inexperienced company can easily damage, destroy, or misplace your film. This means low-quality scans or pictures that are completely missing. This will waste a ton of your time and money, and your sensitive test results can wind up in the wrong hands.
Instead, trust our professionals at CAD/CAM Services. We’ve been doing this for over 35 years, and we have digitized countless pieces of film during our time.
With our help, you can get more functionality out of your NDT results. Instead of holding a piece of film up to a light and trying to decipher it, you can quickly open the image on your computer, zoom in, and see more details in each image.

When you pick our high-quality team for your NDT film digitization project, you’ll notice a lot of huge benefits:

Our NDT film digitization services will begin with a quick conversation between us. You can tell us how many pieces of film you have, and how quickly you need them to be digitized. We’ll let you know if we can meet the demands of your project, and we’ll be honest about our capabilities.
Most of the time, we can handle the biggest and most complicated NDT film digitization projects without even breaking a sweat.
Once we’re all in agreement, our team will get started. Typically, one of our staff members will go to your site to pick up your analog film and bring it back to our home office. This is so much easier than shipping your film, since you never know when things are going to get lost in transit.
Once we have your film in-house, we’ll start delicately digitization each piece. We’ll structure the digital files so they’re easy to find, and sort them so you know exactly what to expect before opening a file.
When everything is done, we’ll go through a round of quality assurance — our team will open every image, inspect the quality, and re-take any scans as needed. We’ll share every digital file with you through a DoD-trusted filesharing service, and ask you to review the images.
If you like everything, we’ll properly destroy the analog film to keep your company secrets private.


No matter how many pieces of analog film you have, our team can digitize them all. We’re here to save you time and money, while avoiding needless headaches associated with dealing with analog film. Turn your obsolete pieces of film into high-quality digital images that can be opened, shared, and edited in a matter of seconds. Work with CAD/CAM Services to get the best NDT film digitization results, today.


FleetPride's axle trolley cart redesigned in Ansys — 37% lighter (210 lbs → 132 lbs) while maintaining full 1,000 lb rated capacity.

A client needed a replacement rotor shaft for industrial equipment. Original CAD files, drawings, and specifications were unavailable.

In this case study, we aimed to create a full digital model of an engine casing. This casing had no current CAD files, outdated drawings, and undocumented shapes because of years of use and part changes.

We were recently tasked with recreating a fan housing using only the client’s original paper drawings.

This case study describes how we helped a defense customer turn a dense point cloud into a usable surface model. This model was a CAD surface for an F‑16 that could feed straight into simulation.
On behalf of JJET Enterprises, I just wanted to thank you and Cad / Cam Services again for the great job and quick turn-around time on the job that we sent you. We would recommend you and definitely will be doing business with you in the near future.
James R. Thomas
JJET Enterprises
“You ROCK and a huge thank you to you and your team for working so diligently to hit our goals.”

Greta Nintzel
Content & Digital Media Associate, Rich Media Team (amazon supply)
Thank you so much for all of your help.
It is greatly appreciated.

Angie
CTR USARMY CCDC ARL (USA)
“CAD / CAM Services has been our source for all CAD related projects over the past 10 years. If it involves CAD conversion or large format scanning, CAD / CAM SERVICES is always our first call.”

Bill Johnson Jr.
Dallas Aerial Surveyors
“CAD / CAM Services provided timely professional consulting advice and guidance that greatly helped us configure our platform for current and near-future expansion needs. Many thanks to Scott Shuppert for all his hard work on this project.”

Richard Schmitter
GTE Media Ventures
“We used CAD / CAM Services for CAD conversion work and it was great! We have already decided to use them for our next project. They did everything they said they were going to do and more. The work turned out well.”

Pete Iannuzzi
Sony Music
“You have been absolutely the BEST Company to work with in my entire career. I almost hate to see us finish our Mylars!”

Jerry McNabb
R Civ USAF – Tinkers Air Force Base
“We used CAD / CAM Services for scanning and converting film and also the purchase and install of IMR’s Electronic Document Imaging Product – Alchemy. They know what they are doing and it has turned out to be a smart purchase for us. We will be adding additional licenses of this product, along with additional scanning and conversion services from them.”

Bill Scott
City of Carrollton
“CAD / CAM Services scanned > 6,000 maps for us and sold and installed a scanner and an EDMS system to our district. It has turned out to be a great investment for our district. We had several competitive firms compete on cost and scanning quality. CAD / CAM Services was the hands-down winner for myself, the engineering staff and the board. We are presently publishing the images on the internet and plan to continue using CAD / CAM Services They treated us fairly and delivered on-time and on-budget.”

Bo Daffin, CTA, RPA
Deputy Chief Appraiser of Central Appraisal District of Collin County
“RISD has been using CAD / CAM Services for years and has no need to consider anybody else. We have used them for scanning thousands of drawings and the install of our engineering/facilities management EDMS system.”

Greg Schulz
Richardson Independent School District
“CAD / CAM Services converted our plant drawings into AutoCAD and they turned out well. We will use them again.”

Phillip Schmidt, Jr.
District Plant Engineering Manager, UPS
“We purchased several Cyco’s AutoManager Workflow licenses from CAD / CAM Services and it has worked out well. We intend to add to this as budget allows”.

Nathan Jones
City of Garland Texas, Engineering Department
“Overall it looked really nice. I definitely like your approach of doing the internals 1st. It really gives me a better idea of what I’m actually programming.”

Shane Duncan
Engineering Manager – W Machine Works Inc.
“CAD / CAM Services was so easy to work with. They delivered our project on time and on budget. I highly recommend.”
Nikko Meyers
Scan Direct
“CAD / CAM Services digitized and converted Electric Utility maps to AutoCAD for our firm. We have been very pleased with the quality of their work and have found CAD / CAM Services to be cooperative and easy to work with.”

Ed Turk
V.P. Cornelius – Pierce Consulting Engineers
“CAD / CAM Services provided timely professional consulting advice and guidance that greatly helped us configure our platform for current and near-future expansion needs. Many thanks to Scott Shuppert for all his hard work on this project.”

Chris Kidd
Dilon Technologies