Outsourcing your electrical CAD project is a great way to save time and money while optimizing the space your electronics take up. Our team has handled countless electrical designs over our decades in business, and we have the confidence and accreditations that you need for the best results.

A lot of companies overlook the importance of their electrical CAD work. Without this step, you can run into reliability issues with any sensor, gauge, motor, or electrical component that your machine uses. To put it simply, our professional electrical CAD services are here to ensure your car’s electrical components are all routed to the battery in the most optimized path while reducing wear on every wire.

Our team can help in any industry or application, not just automotive. Massive aerospace, medical, and consumer electronics companies have utilized CAD/CAM Services to get the most out of their designs over the past decades. We’re here to help you with any electrical project you might have — even if it’s as simple as designing a wiring harness or wiring diagram for a motor in your machine.

Electrical CAD is a general term that refers to designing, drawing, and conceptualizing parts that involve electronics or electricity in general. Some specific examples are printed circuit board (PCB) design, wiring or harness design, and electrical integration within an electro-mechanical assembly.

If you have a motor in your material blender, then you need some level of electrical CAD help to make sure the wires are run correctly, there’s enough space, and you get the right length and gauge wire harness from your manufacturer.

In addition, electrical CAD can also involve creating wiring schematics for your part, assembly, or full machine. These schematics can be used during installation or any troubleshooting in the future. In certain industries, a professional wiring schematic is required before the part can be made or sold.

Electrical CAD is the best way to optimize your PCB, wiring, and component placement on any electromechanical assembly. Since electrical CAD is such a vast subject, the specific benefits depend on your unique application.

Looking at PCBs broadly, a well-made PCB design can maximize your board’s performance and reliability, while minimizing the cost of manufacturing each unit. With an expert’s help, you can unlock a better product.

With wiring diagrams, our professional electrical CAD services can help every electrician who works on your machine in the future. Our labeling convention, attention to detail, and past experience are a great way to create drawings that give the most detail possible to the reader.

Finally, what about wiring harness design? By routing each wire perfectly, you can eliminate the risk of parts wriggling loose and unplugging through continued use. This greatly boosts the reliability of your design. For parts that articulate or move, careful planning with your wiring harness can eliminate the risk of wires rubbing against other parts and shorting after enough use.

Electrical CAD is a quick way to make sure your parts, assemblies, and machines work as well as they should. It also helps with long-term planning and reliability with every electrical part.

Choosing CAD/CAM Services for your next electrical project comes with a lot of massive benefits. Again, the specific benefits will depend on your application and industry, but here are some general benefits of electrical CAD services from CAD/CAM Services:

• Electrical and mechanical help from one source. Our massive team of over 100 engineers and draftsmen includes a variety of electrical, mechanical, and electro-mechanical engineers. By choosing CAD/CAM Services for your electrical CAD needs, you can get more accomplished.
• Better part reliability and service. In the long term, most designers focus on two major metrics: reliability and serviceability. If you outsource your electrical project through our experts at CAD/CAM Services, your designs will perform much better in both of these categories. We create designs that are built to last as long as possible without any issues.
• Save time and money with each part. Not only do you save money and time during the design phase with our engineers, but you’ll also likely save time and money with each unit you fabricate in the future. Our team tends to optimize each part while designing for manufacturing (DfM), which makes each PCB, wiring harness, and electrical part even easier and less expensive to make.
• Boost the productivity of each part. Another benefit of choosing CAD/CAM Services for our electrical CAD work is that our designers can help your parts perform better. This goes beyond long-term reliability and serviceability that we mentioned before — with our electrical CAD help, your parts can physically run better. A well-made PCB design can ensure you use less electricity while getting more performance. With our PCB experts, you’ll achieve better designs that lead to harder-working parts.

Our electrical CAD workflow is surprisingly easy. With all of our collaborations, we like to start with a consultation — this is just a quick chat to understand what you’re looking for, the requirements for your project, and any goals you might have with your project. This conversation helps us put together an accurate quote, timeline, and manpower assessment to get you the best results.

From there, our team gets to work. Our trained staff will start creating your PCB design, wiring harness design, 3D machine layout, or electrical/wiring diagram. With over 100 engineers and draftsmen on our staff, you can get finished drawings back in as little as 24 hours.

All of our drawings go through independent peer reviews to check for quality, manufacturability, and adherence to project specifics. The result? Drawings and designs that you can trust.

For our electronic design automation (EDA) and PCB design, we use the following software:

• Mentor Graphics
• Altium Designer
• KiCad EDA
• Proteus
• and more

We send our final models and files through a secure and DoD-trusted filesharing site. You have full ownership over the design and any IP included. If you have any concerns with the designs, we can fix the mistakes within 24 hours for free.

Our team at CAD/CAM Services takes a lot of pride in the work we deliver. Whether you need a single wiring diagram or a long list of PCBs designed, we can help. We’ve created too many electrical drawings to count over our decades in business, and we know this industry inside and out. Trust our team to get the most out of every electrical unit you manufacture, use, and sell. Give us a call or email today to get a free quote from CAD/CAM Services and start working towards an optimized electro-mechanical design.